No results were found for the filter!
173112-0417 Hand Crimp Tool with crimp die for...
Hand Crimp Tool, small, including crimp die for machined FCT/Molex D-Sub signal contacts, AWG 24-20 (HS Code: 82079099 / COO: US)
€852.60
*
available, please enquire about delivery time
Positioner for M22520/2-01, suitable for FCT...
Positioner for M22520/2-01, suitable for FCT D-Sub coaxial center contacts AWG 32–26 (FMS001–FMS003, FMS006 sockets)
€195.60
*
available, please enquire about delivery time
8400.2281 Souriau/Eaton corresponding,...
Positioner for connectors according to VG95318 (Series 847/848), corresponds to Turret #8400.2281 (HS Code: 82073010 / COO: US)
€618.20
*
available, please enquire about delivery time
M81969/8-05 Removal tool for contacts size 20...
Contact insertion tool for size 20 contacts according to MIL-DTL-38999 Series I - IV. (NSN: 5120-01-335-8657), for the following contacts: M39029/56-352 / M39029/57-358 / M39029/58-364 M39029/75-424 - M39029/75-427 M39029/77-428 -...
€143.90
*
available, please enquire about delivery time
M81969/17-05 Insertion tool for contacts size...
Contact insertion tool for size 12 contacts in accordance with MIL-C-26482, Series I., MIL-DTL-26500, MIL-DTL-83733, MIL-C-38300 for the following contacts: M39029/31-228 / M39029/31-229 M39029/32-247 / M39029/32-248 MS3192-16A-16A /...
€85.80
*
available, please enquire about delivery time
M81969/19-02 Removal tool for contacts size 12...
Contact removal tool for size 12 contacts in accordance with MIL-C-26482, Series I., MIL-DTL-26500, MIL-DTL-83733, MIL-C-38300 for the following contacts: M39029/31-228 / M39029/31-229 M39029/32-247 / M39029/32-248 MS3192-16A-16A /...
€87.80
*
available, please enquire about delivery time
G394 Test mandrel / Gage for Crimp Tool M300BT
Test mandrel / gauge for Crimp Tool M300BT - gauge GO .0610 - NO-GO .0660 on selector setting 4 (HS code: 90318020 / COO: US)
€350.00
*
available, please enquire about delivery time
M85049/128-7 EMC-RFI Shield Termination Band...
M85049/128 EMC-RFI Shield Termination Band 1/8°, stamped buckle, flat, 0.120" wide x 8.125" long for One-Step Banding Tools 1/8", e.g. DBS-2200 Techn. identical to specification: M85049/128-7, MCD-85049-128-7, CPTB-121, NSN 5975-01-414-8379
€3.50
*
available, please enquire about delivery time
G436 Test mandrel / Gage for Crimp Tool M309,...
Test mandrel / gauge for crimping tool M309 - gauge GO .0610 - NO-GO .0660 on selector setting 4 resp. 3 (HS code: 90318020 / COO: US)
€350.00
*
available, please enquire about delivery time
09 99 000 0617-A Harting corresponding, Go /...
Harting corresponding, Go / No-Go gage for 09990000501 (HS-Code: 90318020 / COO: US)
€174.11
*
available, please enquire about delivery time
Air hose 9ft.
Air hose 9 ft. for pneumatic crimping tools
€165.00
*
available, please enquire about delivery time
DRK95-16B (M81969/8-08) Removal tool for...
Contact removal tool for size 16 contacts according to MIL-DTL-38999 Series I - IV. (NSN: 5120-01-335-8687), for the following contacts: M39029/56-352 / M39029/57-358 / M39029/58-364 M39029/75-424 - M39029/75-427 M39029/77-428 -...
€148.00
*
available, please enquire about delivery time
DAK95-16B (M81969/8-07) Removal tool for...
Contact insertion tool for size 16 contacts according to MIL-DTL-38999 Series I - IV. (NSN: 5120-01-335-8657), for the following contacts: M39029/56-352 / M39029/57-358 / M39029/58-364 M39029/75-424 - M39029/75-427 M39029/77-428 -...
€143.90
*
available, please enquire about delivery time
DMC Hand Crimp Tool for Amphenol-PYLE Starline...
Hand Crimp Tool for Amphenol-PYLE Starline Pin & Socket Contacts 10-18 AWG (approx. 0,75-5mm²), without positioner, suitable test mandrel G115-1 (HS-Code: 82079099 / COO: US)
€917.11
*
available, please enquire about delivery time
DRK145 Removal Tool for D-Sub contacts size 20...
Contact removal tool for D-Sub contacts size 20 contacts MIL-C-24308 (NSN 5120-01-361-9408), for the following contacts: M39029/64-369 / M39029/64-968 M39029/63-368 / M39029/63-928 M24308/10-1 / M24308/11-1
€157.50
*
available, please enquire about delivery time
DRK95-22MB (M81969/8-02) Removal tool for D-Sub...
Contact removal tool for D-Sub HD contacts size 22 Contacts acc. to MIL-C-24308 MIL-DTL-38999 (Series I - IV.) MIL-DTL-83733 (NSN: 5120-01-335-8660), for the following contacts: M39029/58-360 / M39029/58-361 / M39029/58-986 M39029/57-354...
€146.75
*
available, please enquire about delivery time
DAK95-22MB (M81969/8-01) Insertion tool for...
Contact insertion tool for D-Sub HD contacts size 22 Contacts acc. to MIL-C-24308 MIL-DTL-38999 (Series I - IV.) MIL-DTL-83733 (NSN: 5120-01-335-8660), for the following contacts: M39029/58-360 / M39029/58-361 / M39029/58-986...
€147.63
*
available, please enquire about delivery time
M22520/23-01 Pneumatic crimping tool...
DMC Pneumatic crimping tool (MIL-spec M22520/23-01 / MIL-DTL-22520/23-01 / AS22520/23-01, VG95236-T104) for turned power contacts AWG 8 - 4/0
€2,700.00
*
available, please enquire about delivery time
Turret Head for MIL-C-5015 / VG95234 "ITT Cannon"
Turret Head for MIL-C-5015 / VG95234 / CA/CGL contacts ITT Cannon size 16 + 12 for AWG26-12, suitable for M22520/1-01
€247.50
*
available, please enquire about delivery time
M22520/31-01 Hand Crmp Tool for size 12...
DMC Hand-Crimpzange blau, nach MIL-Norm M22520/31-01 (MIL-DTL-22520/31-01 / AS22520/31-01) Rundcrimp für äußeren Schirm ohne Positionierer, passender Prüfdorn G443 / M22520/3-15
€966.40
*
available, please enquire about delivery time
Viewed